Implant Grade Titanium








Showing 1–60 of 201 results

Why choose implant-level titanium piercing jewelry?

Many cheaper jewelry materials, such as surgical steel, can cause unpleasant complications in full-time use. Steel always contains nickel, even if it is surgical steel 316L, but unfortunately, with implant-grade titanium jewelry (Ti-6AL-4V-ELI ASTM F136), you can be sure of its safety. A titanium piercing alone does not guarantee a safe material, so you should pay attention to what the titanium code is and it should be (Ti-6AL-4V-ELI ASTM F136). Even if the weaker steel material does not make you allergic immediately, it can expose you little by little and develop into a nickel allergy at a later stage.

We carefully select the products we sell in our selection. This jewelry is also high-gloss implant-grade titanium (Ti-6AL-4V-ELI ASTM F136), which is the best possible material for first jewelry and for everyday use. This implant grade titanium is the best piercing jewelry you can get on the market. Does not contain Nickel. Safe to use full time.

Better than surgical steel piercing jewelry

High-gloss implant-grade titanium (Ti-6AL-4V-ELI ASTM F136) is the best possible material for first jewelry and for everyday use. This implant grade titanium is the best you can get on the piercing market. Does not contain Nickel. Safe to use full time. Our products are the best on the market and also preferred by professional piercers.

This material is suitable for first jewelry. Titanium as a piercing jewelry material is excellent. It is a durable, light, rigid and dense metal that resists age and corrosion well.

The material of the piercing jewelry is really important in terms of the well-being of the piercing and your health. Unfavorable materials such as other titanium mixtures, surgical steel 316L, plastic and acrylic can cause serious problems and over time sensitize to allergies, e.g. For nickel allergy. In the worst case, your piercing can grow out, have symptoms for years due to poor material, e.g. by leaking blood or tissue fluid, and become painful from time to time.

If you suffer from any of these symptoms, please contact us. Many people have received help from us for complications arising from piercings just by changing the jewelry.

Choose a suitable size non-threaded base part

Tips for choosing the right labret post

3mm and 4mm options are available for the width of the back part of the post. Here are some things to consider when choosing the right size:

  • For piercings that are healing, we recommend a 4mm back part.
  • Piercings inside the mouth, e.g. a lip jewelry, also require a 4mm back part, so that the back part does not sink into the soft tissue inside the mouth.
  • If you choose a large, more decorative (e.g. arch-shaped) tip part, the Labret heel part 4mm width also gives your jewelry additional support.
  • The side of the nose with a 3mm piercing does not collect body fluids as much and does not take up space in the nostril. It is also not visible from there on the smaller back and does not feel uncomfortable to use.
  • In the tragus piercing, the 3mm back part makes it easier to use earphones and doesn’t collect so much earwax.

Tips for choosing length and thickness

Please note that the size suggestions are indicative recommendations and you can get confirmation of the perfect size for you from the piercing shop.

With a threadless labret base for the following piercings:

  • Earring (the most used sizes are 0.8mm-1.2mm thickness and 5mm-7mm length.)
  • Cartilage jewelery (helix, forward helix, conch and tragus jewelery The most used sizes are 1.2mm thickness and 6mm-7mm length.)
  • Earring (the most used sizes are 0.8mm-1.2mm thickness and 6mm-7mm length.)
  • Lip jewelry (medusa-, labret- Ashley jewelry, The most used sizes are 1.2mm thickness and 7mm-8mm length.)
  • If you have a basic earring in your piercing, we recommend 0.8mm thickness.

For easier jewelry installation

Selection of insertion pin size

Choose your insertion pin according to the size of the jewelry you ordered. If your jewelry is 1.2mm in size, also choose 1.2mm as the thickness of the insertion pin. The threadless insertion pin is suitable for the installation of jewelry without threads. You can also carefully bend the insertion pin slightly at an angle, so you can get it better for narrow ear piercings, such as forward helix and tragus piercings. Keep the insertion pin for your other jewelry as well, because you can use it on all your jewelry with the same thickness and fastening mechanisms.

The insertion pin can also be used as a stretcher!

The insertion pin is also very suitable for stretching. The insertion pin is designed so that one end is very thin, so that you can easily find your piercing hole, and the other end of the insertion pin is the size of the desired thickness. For example, if your septum jewelry is currently 1.2 mm thick, you can order a 1.6 mm thick insertion pin and a 1.6 mm thick jewelry that you can easily put in place with the insertion pin. This way you can safely reach the desired size little by little.

Installation pin suitable for threadless jewelry


Tervetuloa uudistuneeseen Luxjewelleen

Suomeksi palvelemme jatkossa osoitteessa:

Welcome to Luxjewelle

Continue shopping in english: