Materials and warranty

The best piercing jewelry materials

The jewelry we sell is made of high-quality materials. The jewelry uses highly polished implant-grade titanium (Ti-6AL-4V-ELI ASTM F136), as well as genuine yellow gold, white gold and rose gold. Our selection of precious stones includes zircons, natural stones, swarovski, synthetic opals, pearls, genuine opals and genuine diamonds.

Please remember, however, that piercing jewelry is significantly more susceptible to heavy wear and, for example, accidents than other jewelry. Therefore, over time, the jewelry may also begin to show its age. You also have to remember that real gold jewelry is softer than titanium, so always treat it with the dignity it demands.

We will tell you more about the properties of the jewelry material in connection with each product description.

The stones are planted with stone planting and are not glued. Thus, the stones last better in their places and they come into their own when viewed from every angle.
The stones are planted with stone planting and are not glued. Thus, the stones last better in their places and they come into their own when viewed from every angle.

The stones in the jewelry are set, not glued

Our branded piercing jewelry is made, like high-quality jewelry in general. The stones are planted with stone planting and are not glued. Thus, the stones last better in their places and they come into their own when viewed from every angle. The gemstones are also precisely cut and polished so that their properties are highlighted when the light hits them. The stone attachments are thus chemical-free, and our jewelry does not contain any chemicals harmful to the body.

All our piercing jewelry is nickel free. You can also read why nickel-free jewelry is the best option for piercings.

If you have complications with your pierced jewelry, we recommend reading our article on the importance of materials in pierced jewelry.

Warranty:

Jewelry manufacturers give their jewelry a warranty against manufacturing defects, which is individual depending on the manufacturer. Some even give a lifetime warranty on their products. You can get more detailed information about the manufacturer’s warranty on the manufacturer’s website.

Please note that jewelry must be maintained from time to time and stored correctly. Read more about the maintenance and storage of pierced jewelry.

We check all our jewelry for sale carefully before mailing, so that we can be sure of the quality of our products. Manufacturers also have exact quality requirements for their jewelry. You can find more information on the manufacturers’ websites.

Some manufacturers give a lifetime warranty on their gold jewelry. Ask us more.

NOTE! The warranty does not cover:

– Bumps, scratches or damage caused by an accident (impacts or too hard handling).

– Loosening of stones. Note! If a stone comes loose from a new piece of jewelry, you must immediately contact our customer service, in which case we will contact the manufacturer. If the jewelry shows mechanical damage that has caused the stone to come off, the warranty does not cover it.

– Loss of jewelry or part of it. (Always read the instructions for use of piercing jewelry carefully.)

– Blurring, discoloration or surface damage of the jewelry caused by improper cleaning or the use of improper substances near the jewelry. Such substances can be, for example, chemical cleaning agents, hair products, perfumes and fats. Too much UV light can also weaken the jewelry prematurely.

– Loosening or breaking of parts due to normal use and natural wear and tear. (In the case of gold jewelry, we can send it to the jewelry manufacturer for repair at your request, ask us for more information about this.)

Choose a suitable size non-threaded base part

Tips for choosing the right labret post

3mm and 4mm options are available for the width of the back part of the post. Here are some things to consider when choosing the right size:

  • For piercings that are healing, we recommend a 4mm back part.
  • Piercings inside the mouth, e.g. a lip jewelry, also require a 4mm back part, so that the back part does not sink into the soft tissue inside the mouth.
  • If you choose a large, more decorative (e.g. arch-shaped) tip part, the Labret heel part 4mm width also gives your jewelry additional support.
  • The side of the nose with a 3mm piercing does not collect body fluids as much and does not take up space in the nostril. It is also not visible from there on the smaller back and does not feel uncomfortable to use.
  • In the tragus piercing, the 3mm back part makes it easier to use earphones and doesn’t collect so much earwax.

Tips for choosing length and thickness

Please note that the size suggestions are indicative recommendations and you can get confirmation of the perfect size for you from the piercing shop.

With a threadless labret base for the following piercings:

  • Earring (the most used sizes are 0.8mm-1.2mm thickness and 5mm-7mm length.)
  • Cartilage jewelery (helix, forward helix, conch and tragus jewelery The most used sizes are 1.2mm thickness and 6mm-7mm length.)
  • Earring (the most used sizes are 0.8mm-1.2mm thickness and 6mm-7mm length.)
  • Lip jewelry (medusa-, labret- Ashley jewelry, The most used sizes are 1.2mm thickness and 7mm-8mm length.)
  • If you have a basic earring in your piercing, we recommend 0.8mm thickness.

For easier jewelry installation

Selection of insertion pin size

Choose your insertion pin according to the size of the jewelry you ordered. If your jewelry is 1.2mm in size, also choose 1.2mm as the thickness of the insertion pin. The threadless insertion pin is suitable for the installation of jewelry without threads. You can also carefully bend the insertion pin slightly at an angle, so you can get it better for narrow ear piercings, such as forward helix and tragus piercings. Keep the insertion pin for your other jewelry as well, because you can use it on all your jewelry with the same thickness and fastening mechanisms.

The insertion pin can also be used as a stretcher!

The insertion pin is also very suitable for stretching. The insertion pin is designed so that one end is very thin, so that you can easily find your piercing hole, and the other end of the insertion pin is the size of the desired thickness. For example, if your septum jewelry is currently 1.2 mm thick, you can order a 1.6 mm thick insertion pin and a 1.6 mm thick jewelry that you can easily put in place with the insertion pin. This way you can safely reach the desired size little by little.

Installation pin suitable for threadless jewelry

LuxJewelle

Tervetuloa uudistuneeseen Luxjewelleen

Suomeksi palvelemme jatkossa osoitteessa: Luxjewelle.fi

Welcome to Luxjewelle

Continue shopping in english: Luxjewelle.com