(6 customer reviews)

Threadless Pin Insertion Tapers -Titanium

20,00 

  • High Polish Implant Grade Titanium
  • Manufacturer’s warranty against manufacturing defects
Added to wishlist
Added to wishlist

Check your favourites from the wishlist

If putting a push pin piercing jewelry in place at home seems challenging, here is the solution for you! These insertion pins help you get your piercing in place and make it downright easy! Attach the desired piercing jewelry to the end of the installation pin and then thread the installation pin through the piercing hole and the jewelry will slide neatly into place! Remove the insertion pin from the jewelry and after that you can just press the tip part of the jewelry closed!

With insertion pin, it is also easier for you to get a piece of jewelry into a piercing hole that has not had a piece of jewelry for a long time or has recently fallen out. In these cases, the piercing hole has often already closed a little, but it is quite possible to find and save it with the help of these insertion pins. The thin head ensures that you can find your piercing again and get the desired size piece of jewelry back in place (recommended to put 0.8mm-1.2mm maximum due to the risk of tissue damage).

How to choose the right size?

Choose your insertion pin according to the size of the jewelry you ordered. If your jewelry is 1.2mm in size, also choose 1.2mm as the thickness of the insertion pin. Choose a mounting pin also equipped with a non-threaded or threaded end, depending on the fastening mechanism of your jewelry. You can also carefully bend the insertion pin slightly at an angle, so you can get it better for narrow ear piercings, such as forward helix and tragus piercings. Keep the insertion pin for your other jewelry as well, because you can use it on all your jewelry with the same thickness and fastening mechanisms.

The insertion pin can also be used as a stretcher!

The insertion pin is also very suitable for stretching. The insertion pin is designed so that one end is very thin, so that you can easily find your piercing hole, and the other end of the insertion pin is the size of the desired thickness. For example, if your septum jewelry is currently 1.2 mm thick, you can order a 1.6 mm thick insertion pin and a 1.6 mm thick jewelry that you can easily put in place with the insertion pin. This way you can safely reach the desired size little by little.

Info and instructions

6 reviews for Threadless Pin Insertion Tapers -Titanium

1-5 of 6 reviews
  1. Makes the installation of the jewelry much easier

  2. This made it so easy to put the nose piercing in place! I really recommend it, even though the price is quite high, it’s worth it 🙂

  3. Easy to use and get the jewelry in place

Add a review
Currently, we are not accepting new reviews

Delivery & Shipping

Free delivery on orders over 250,00 €

Worldwide delivery UPS and PostNord.

Terms and conditions

Choose a suitable size non-threaded base part

Tips for choosing the right labret post

3mm and 4mm options are available for the width of the back part of the post. Here are some things to consider when choosing the right size:

  • For piercings that are healing, we recommend a 4mm back part.
  • Piercings inside the mouth, e.g. a lip jewelry, also require a 4mm back part, so that the back part does not sink into the soft tissue inside the mouth.
  • If you choose a large, more decorative (e.g. arch-shaped) tip part, the Labret heel part 4mm width also gives your jewelry additional support.
  • The side of the nose with a 3mm piercing does not collect body fluids as much and does not take up space in the nostril. It is also not visible from there on the smaller back and does not feel uncomfortable to use.
  • In the tragus piercing, the 3mm back part makes it easier to use earphones and doesn’t collect so much earwax.

Tips for choosing length and thickness

Please note that the size suggestions are indicative recommendations and you can get confirmation of the perfect size for you from the piercing shop.

With a threadless labret base for the following piercings:

  • Earring (the most used sizes are 0.8mm-1.2mm thickness and 5mm-7mm length.)
  • Cartilage jewelery (helix, forward helix, conch and tragus jewelery The most used sizes are 1.2mm thickness and 6mm-7mm length.)
  • Earring (the most used sizes are 0.8mm-1.2mm thickness and 6mm-7mm length.)
  • Lip jewelry (medusa-, labret- Ashley jewelry, The most used sizes are 1.2mm thickness and 7mm-8mm length.)
  • If you have a basic earring in your piercing, we recommend 0.8mm thickness.

For easier jewelry installation

Selection of insertion pin size

Choose your insertion pin according to the size of the jewelry you ordered. If your jewelry is 1.2mm in size, also choose 1.2mm as the thickness of the insertion pin. The threadless insertion pin is suitable for the installation of jewelry without threads. You can also carefully bend the insertion pin slightly at an angle, so you can get it better for narrow ear piercings, such as forward helix and tragus piercings. Keep the insertion pin for your other jewelry as well, because you can use it on all your jewelry with the same thickness and fastening mechanisms.

The insertion pin can also be used as a stretcher!

The insertion pin is also very suitable for stretching. The insertion pin is designed so that one end is very thin, so that you can easily find your piercing hole, and the other end of the insertion pin is the size of the desired thickness. For example, if your septum jewelry is currently 1.2 mm thick, you can order a 1.6 mm thick insertion pin and a 1.6 mm thick jewelry that you can easily put in place with the insertion pin. This way you can safely reach the desired size little by little.

Installation pin suitable for threadless jewelry

LuxJewelle

Tervetuloa uudistuneeseen Luxjewelleen

Suomeksi palvelemme jatkossa osoitteessa: Luxjewelle.fi

Welcome to Luxjewelle

Continue shopping in english: Luxjewelle.com