Invictus Body Jewelry

Double Hoop Clicker -24Kt Gold PVD Titanium

40,00 41,00 

  • 24Kt Gold PVD Implant Grade Titanium
  • Hinged Segment Clicker
  • Manufacturer’s warranty against manufacturing defects

 

Material
Implant grade titanium
24KT Gold PVD Titanium
Added to wishlist
Added to wishlist

Check your favourites from the wishlist

Delivery time for backordered items is 1-3 weeks.

This ring brilliantly combines a striking and graceful whole at the same time. The jewelry is available in 2 most common sizes suitable for cartilage piercings. However, you can also use this ring for piercings on the side of the nose, and why not elsewhere if the size is suitable!

Clicker rings

The jewelry has a small hinge attachment that is easy to click open and close. The hinge snaps into place easily, and there is no need to use force or tools to install it.

The hinged ring will not fall off by itself

Depending on the jewelry model, the hinges have different stiffnesses. However, the hinged attachment does not open by itself. Hinge fastening is the most secure fastening option, and you don’t need to remember to check it, it stays on by itself.

How to use Clicker piercing ring
 

24KT Gold PVD titanium piercing jewelry

Our selection of 24-karat gold PVD-coated implant-level titanium jewelry is nickel-free and hypoallergenic piercing jewelry. As a material, they are suitable for everyone and do not cause sensitivities. These properties are essential for the well-being and rapid healing of the piercing.

Gold piercing jewelry

PVD coating (Physical Vapor Deposition) is a vacuum chamber process in which a very thin but strong film of the purest nickel-free 24 carat gold is spread on the surface of the pierced jewelry. Compared to traditional jewelry gilding, thin film coating is the safest method of coating jewelry for the body and the environment. This coating is made to last and won’t crack, wear, discolor or change color over time.

The best piercing jewelry

24 carat gold is the purest and most valuable form of gold. Because of its soft texture, it cannot be used alone in jewelry making, but as a coating it is the perfect material for piercing jewelry. Our jewelry is from the best manufacturers on the market, and is preferred by world-renowned professional piercers. Certificates are available from jewelry manufacturers that prove the jewelry’s exact material information.

Reviews

There are no reviews yet

Add a review
Currently, we are not accepting new reviews

Delivery & Shipping

Free delivery on orders over 250,00 €

Delivery time for backordered items is 1-3 weeks.

Worldwide delivery UPS and PostNord.

Terms and conditions

Choose a suitable size non-threaded base part

Tips for choosing the right labret post

3mm and 4mm options are available for the width of the back part of the post. Here are some things to consider when choosing the right size:

  • For piercings that are healing, we recommend a 4mm back part.
  • Piercings inside the mouth, e.g. a lip jewelry, also require a 4mm back part, so that the back part does not sink into the soft tissue inside the mouth.
  • If you choose a large, more decorative (e.g. arch-shaped) tip part, the Labret heel part 4mm width also gives your jewelry additional support.
  • The side of the nose with a 3mm piercing does not collect body fluids as much and does not take up space in the nostril. It is also not visible from there on the smaller back and does not feel uncomfortable to use.
  • In the tragus piercing, the 3mm back part makes it easier to use earphones and doesn’t collect so much earwax.

Tips for choosing length and thickness

Please note that the size suggestions are indicative recommendations and you can get confirmation of the perfect size for you from the piercing shop.

With a threadless labret base for the following piercings:

  • Earring (the most used sizes are 0.8mm-1.2mm thickness and 5mm-7mm length.)
  • Cartilage jewelery (helix, forward helix, conch and tragus jewelery The most used sizes are 1.2mm thickness and 6mm-7mm length.)
  • Earring (the most used sizes are 0.8mm-1.2mm thickness and 6mm-7mm length.)
  • Lip jewelry (medusa-, labret- Ashley jewelry, The most used sizes are 1.2mm thickness and 7mm-8mm length.)
  • If you have a basic earring in your piercing, we recommend 0.8mm thickness.

Choose the material you want

For easier jewelry installation

Selection of insertion pin size

Choose your insertion pin according to the size of the jewelry you ordered. If your jewelry is 1.2mm in size, also choose 1.2mm as the thickness of the insertion pin. The threadless insertion pin is suitable for the installation of jewelry without threads. You can also carefully bend the insertion pin slightly at an angle, so you can get it better for narrow ear piercings, such as forward helix and tragus piercings. Keep the insertion pin for your other jewelry as well, because you can use it on all your jewelry with the same thickness and fastening mechanisms.

The insertion pin can also be used as a stretcher!

The insertion pin is also very suitable for stretching. The insertion pin is designed so that one end is very thin, so that you can easily find your piercing hole, and the other end of the insertion pin is the size of the desired thickness. For example, if your septum jewelry is currently 1.2 mm thick, you can order a 1.6 mm thick insertion pin and a 1.6 mm thick jewelry that you can easily put in place with the insertion pin. This way you can safely reach the desired size little by little.

Installation pin suitable for threadless jewelry

As a new subscriber

-15%

From the first order

*Cannot be combined with other discounts. The discount does not apply to BVLA products.

LuxJewelle

Tervetuloa uudistuneeseen Luxjewelleen

Suomeksi palvelemme jatkossa osoitteessa: Luxjewelle.fi

Welcome to Luxjewelle

Continue shopping in english: Luxjewelle.com