Invictus Body Jewelry

Spider Top -Black PVD Titanium

39,00 

  • Black PVD Implant Grade Titanium
  • Threadless End
  • 9.20mm (L) x 8.69mm (W) x 2.57mm (THK)
  • Cubic Zirconia
  • Manufacturer’s warranty against manufacturing defects

2 in stock (can be backordered)

Added to wishlist
Added to wishlist

Check your favourites from the wishlist

Purchase here a matching base or add-on for your jewelry

Delivery time for backordered items is 1-3 weeks.

This spider-themed piercing jewelry is made from implant-grade titanium with a wear-resistant PVD coating. The centerpiece of the jewelry features a mystical black zircon stone that sparkles within the spider. The minimalist yet dramatic design combines the titanium frame with the black stone, creating a piece that captures attention and carries deep symbolism.

The spider often symbolizes creativity, patience, and the intricate webs of life. The black zircon stone enhances the spider’s mysterious and enigmatic nature, adding depth and strength. This jewelry is perfect for those who appreciate multi-layered symbolism and want an elegant yet powerful addition to their piercing collection — a piece that represents creativity and balance in life.

This piece is ideal for Flat Helix piercings and as an earring.

Threadless piercing jewelry (push pin)

Our threadless piercing jewelry consists of a separate base part and a jewelry top that can be connected to it. You only need one stem that fits your piercing, so you can combine it with any threadless jewelry top from our selection. This is environmentally friendly, economical and smart at the same time.

How to use threadless push-pin piercing jewelry
How to use threadless push-pin piercing jewelry

More carefree when the top parts do not fall off!

Threadless (push pin) jewelry is much easier to use than traditional threaded piercing jewelry. You don’t need to tighten or twist the top to check if it’s tight. In these pieces of jewelry, it is enough to occasionally check by gently pressing on both sides of the piece that the pin of the top part is inside the base part all the way to the bottom. This jewelry model is an easy-to-use alternative for users of non-standard piercing jewelry.

Easier to take out and put back in place!

The threadless jewelry opens on both sides by pulling and it is closed by pressing the pin of the jewelry top into the base part. When changing a non-threaded piece of jewelry, all you have to do is pull the jewelry tip out of the base and press the other inserted jewelry top into place.

With your order, you will receive detailed instructions for putting the jewelry into use, and you can also find them on our website under “Jewelry instructions“.

Black PVD-Coated Titanium

PVD-coated titanium jewelry is a glossy, lightweight, and durable choice for piercings that everyone can wear. They are hypoallergenic and nickel-free, which are crucial attributes for the well-being and quick healing of piercings. The coating also reduces friction, meaning it won’t accumulate tissue fluid or impurities any more than implant-grade titanium.

The PVD coating does not wear off or crack with use.

PVD coating, also known as Physical Vapor Deposition, is a vacuum chamber process where an extremely thin and uniform layer is applied to the surface of the jewelry to protect it from wear. This coating does not add an additional layer to the object that could crack or wear off over time (like old paint, for example). The black titanium nitride applied with PVD coating is a standard for medical instruments, making it a safe and environmentally friendly choice.

A stylish and safe choice.

The coating acts as a glossy armor, providing a strong and thin layer for piercing jewelry. Unlike other companies’ applied paints and various other methods that wear off, this technique is body-friendly, ensuring safe and problem-free use in piercing jewelry.

Reviews

There are no reviews yet

Add a review
Currently, we are not accepting new reviews

Delivery & Shipping

Free delivery on orders over 250,00 €

Delivery time for backordered items is 1-3 weeks.

Worldwide delivery UPS and PostNord.

Terms and conditions

Choose a suitable size non-threaded base part

Tips for choosing the right labret post

3mm and 4mm options are available for the width of the back part of the post. Here are some things to consider when choosing the right size:

  • For piercings that are healing, we recommend a 4mm back part.
  • Piercings inside the mouth, e.g. a lip jewelry, also require a 4mm back part, so that the back part does not sink into the soft tissue inside the mouth.
  • If you choose a large, more decorative (e.g. arch-shaped) tip part, the Labret heel part 4mm width also gives your jewelry additional support.
  • The side of the nose with a 3mm piercing does not collect body fluids as much and does not take up space in the nostril. It is also not visible from there on the smaller back and does not feel uncomfortable to use.
  • In the tragus piercing, the 3mm back part makes it easier to use earphones and doesn’t collect so much earwax.

Tips for choosing length and thickness

Please note that the size suggestions are indicative recommendations and you can get confirmation of the perfect size for you from the piercing shop.

With a threadless labret base for the following piercings:

  • Earring (the most used sizes are 0.8mm-1.2mm thickness and 5mm-7mm length.)
  • Cartilage jewelery (helix, forward helix, conch and tragus jewelery The most used sizes are 1.2mm thickness and 6mm-7mm length.)
  • Earring (the most used sizes are 0.8mm-1.2mm thickness and 6mm-7mm length.)
  • Lip jewelry (medusa-, labret- Ashley jewelry, The most used sizes are 1.2mm thickness and 7mm-8mm length.)
  • If you have a basic earring in your piercing, we recommend 0.8mm thickness.

Choose the material you want

For easier jewelry installation

Selection of insertion pin size

Choose your insertion pin according to the size of the jewelry you ordered. If your jewelry is 1.2mm in size, also choose 1.2mm as the thickness of the insertion pin. The threadless insertion pin is suitable for the installation of jewelry without threads. You can also carefully bend the insertion pin slightly at an angle, so you can get it better for narrow ear piercings, such as forward helix and tragus piercings. Keep the insertion pin for your other jewelry as well, because you can use it on all your jewelry with the same thickness and fastening mechanisms.

The insertion pin can also be used as a stretcher!

The insertion pin is also very suitable for stretching. The insertion pin is designed so that one end is very thin, so that you can easily find your piercing hole, and the other end of the insertion pin is the size of the desired thickness. For example, if your septum jewelry is currently 1.2 mm thick, you can order a 1.6 mm thick insertion pin and a 1.6 mm thick jewelry that you can easily put in place with the insertion pin. This way you can safely reach the desired size little by little.

Installation pin suitable for threadless jewelry

As a new subscriber

-15%

From the first order

*Cannot be combined with other discounts. The discount does not apply to BVLA products.

LuxJewelle

Tervetuloa uudistuneeseen Luxjewelleen

Suomeksi palvelemme jatkossa osoitteessa: Luxjewelle.fi

Welcome to Luxjewelle

Continue shopping in english: Luxjewelle.com