NoPull® Piercing Disc -Silicone Disc for Piercing Bumps

4,90 

  • Medical-grade silicone
  • Silicone disc for piercing care
  • Diameter: 5mm / 7mm
  • Thickness: 1mm
  • Compatible with jewellery featuring a 1.0–1.6 mm gauge

Sold individually. Jewellery not included.

Added to wishlist
Added to wishlist

Check your favourites from the wishlist

  • Letter delivery

  • Pickup point / parcel locker

  • Home delivery

  • Express shipping

  • International shipping 🌏

  • Online banking payments

  • Visa

  • Mastercard

  • American Express

  • Apple Pay/Google Pay

  • MobilePay

  • Klarna (Pay later / Installments)

  • PayPal

NoPull® Piercing Disc – For Piercing Bumps & Irritation

NoPull® Piercing Disc is the original medical-grade silicone piercing disc designed to protect irritated piercings and support the healing process. The disc is threaded onto the jewellery and positioned over the affected area, where it helps reduce pressure, friction, and other factors that may contribute to irritation.

Trusted by piercing professionals worldwide, NoPull® is a widely recognized solution for managing piercing bumps, hypertrophic scarring, and other common piercing complications. Made from soft and flexible medical-grade silicone, the disc comfortably adapts to the skin and is suitable for most ear, nose, and cartilage piercings.

Features

  • Original NoPull® Piercing Disc
  • Made from medical-grade silicone
  • Soft, flexible, and comfortable to wear
  • Suitable for most piercings
  • Helps reduce pressure and friction around the piercing
  • Trusted by piercing professionals worldwide
  • Made in the USA

Instructions for Use

  1. Wash your hands before handling the NoPull® Disc.
  2. Position the disc around the piercing where the bump or irritation has developed.
  3. Ensure your jewellery post is long enough to accommodate the disc.
  4. Clean the piercing after placing the disc.
  5. The silicone disc should maintain gentle and consistent contact with the affected area.
  6. Excessive pressure may cause discomfort and interfere with circulation.
  7. If the disc moves freely, an additional disc or an O-ring may be used to improve the fit.
  8. Clean the piercing once or twice daily and rinse thoroughly.
  9. Dry using a clean paper towel or disposable tissue.
  10. Do not remove the disc until the bump or scar tissue has completely resolved.

Important Information

  • Do not use ointments or oils while wearing a NoPull® Disc.
  • Any dried discharge can be softened with clean warm water before cleaning.
  • Results vary between individuals. According to the manufacturer, noticeable improvement is often seen within approximately 3–4 weeks of consistent use.
  • Always use NoPull® on clean skin and with a properly cleaned piercing.

Package contains 1 x NoPull® Piercing Disc.

Premium luxury piercing jewelry

Ainutlaatuiset_lävistyskorut2

SIZE GUIDE

Find the most common jewelry sizes in our size chart and learn how to measure your jewelry correctly.

LuxJewelle lävistäjä aunetta

YOUR PIERCER IS HERE TO HELP

Our piercer is also happy to help you remotely with any piercing-related questions.

PAC-chalk-explosion Available in-store now (1)

AFTERCARE SPRAY FOR DAILY PIERCING CLEANING

This saline solution comes in a convenient pressurized bottle, making it easy to take with you wherever you go. The fine mist spray makes cleaning your piercings quick and effortless.

DID YOU FIND WHAT YOU WERE LOOKING FOR?

We’re happy to help you choose the right jewelry. If you couldn’t find the information you need, feel free to contact our customer service.

Choose a suitable size non-threaded base part

Tips for choosing the right labret post

3mm and 4mm options are available for the width of the back part of the post. Here are some things to consider when choosing the right size:

  • For piercings that are healing, we recommend a 4mm back part.
  • Piercings inside the mouth, e.g. a lip jewelry, also require a 4mm back part, so that the back part does not sink into the soft tissue inside the mouth.
  • If you choose a large, more decorative (e.g. arch-shaped) tip part, the Labret heel part 4mm width also gives your jewelry additional support.
  • The side of the nose with a 3mm piercing does not collect body fluids as much and does not take up space in the nostril. It is also not visible from there on the smaller back and does not feel uncomfortable to use.
  • In the tragus piercing, the 3mm back part makes it easier to use earphones and doesn’t collect so much earwax.

Tips for choosing length and thickness

Please note that the size suggestions are indicative recommendations and you can get confirmation of the perfect size for you from the piercing shop.

With a threadless labret base for the following piercings:

  • Earring (the most used sizes are 0.8mm-1.2mm thickness and 5mm-7mm length.)
  • Cartilage jewelery (helix, forward helix, conch and tragus jewelery The most used sizes are 1.2mm thickness and 6mm-7mm length.)
  • Earring (the most used sizes are 0.8mm-1.2mm thickness and 6mm-7mm length.)
  • Lip jewelry (medusa-, labret- Ashley jewelry, The most used sizes are 1.2mm thickness and 7mm-8mm length.)
  • If you have a basic earring in your piercing, we recommend 0.8mm thickness.

Choose the material you want

For easier jewelry installation

Selection of insertion pin size

Choose your insertion pin according to the size of the jewelry you ordered. If your jewelry is 1.2mm in size, also choose 1.2mm as the thickness of the insertion pin. The threadless insertion pin is suitable for the installation of jewelry without threads. You can also carefully bend the insertion pin slightly at an angle, so you can get it better for narrow ear piercings, such as forward helix and tragus piercings. Keep the insertion pin for your other jewelry as well, because you can use it on all your jewelry with the same thickness and fastening mechanisms.

The insertion pin can also be used as a stretcher!

The insertion pin is also very suitable for stretching. The insertion pin is designed so that one end is very thin, so that you can easily find your piercing hole, and the other end of the insertion pin is the size of the desired thickness. For example, if your septum jewelry is currently 1.2 mm thick, you can order a 1.6 mm thick insertion pin and a 1.6 mm thick jewelry that you can easily put in place with the insertion pin. This way you can safely reach the desired size little by little.

Installation pin suitable for threadless jewelry

Join Luxfamily

Let’s enjoy piercings together! You will receive comprehensive information about piercings and be the first to know about new products right to your email.

-15%

From the first order

*Cannot be combined with other discounts. The discount does not apply to BVLA products.

LuxJewelle

Tervetuloa uudistuneeseen Luxjewelleen

Suomeksi palvelemme jatkossa osoitteessa: Luxjewelle.fi

Welcome to Luxjewelle

Continue shopping in english: Luxjewelle.com